Evinrude E TEC G2 Engines 150 H.O. C150HGLF

Specification Evinrude E TEC G2 Engines 150 H.O. C150HGLF

• Engine Type: H.O. V6 66° E-TEC G2 D.I  Evinrude E TEC G2 Engines 150 H.O. C150HGLFEvinrude E TEC G2
• Engines 150 H.O. C150HGLF
• Bore x Stroke – in (mm): 3.39 x 3.10 (86 x 78.7).
• Displacement – cu in (L): 167 (2.7).
• Gear Ratio: 2.17:1.
• Full Throttle RPM Range: 5000-6000 RPM.
• Starting: Electric.Evinrude E TEC G2 Engines.
• Controls: ICON II.
• Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode.
• Alternator Output*: 133 Amps Total / 50 net Dedicated / 14 amps @ idle.
• Trim Method: Power Trim & Tilt.
• Trim Range: -6° to 15°.
• Lubrication: Multi-Point Targeted Oiling.
• Oil Tank Capacity – gal (L): On-Engine 3 (11.4) / Accessory 1.8 (6.8), 3 (11.3) & 10 (37.85).
• Recommended Oil: XPS Marine XD100.
• Recommended Fuel: 87 Octane.
• Warranty: 5-Year Engine** / 5-Year Corrosion.
• Mounting Centers – in (mm): Minimum 26 (660).
• Color Customization: Over 400 Color Panel Options.
• Integrated Features: Dual Axis Rigging / iTrim.
• 100% Global Emissions Compliant: EPA 2013 / CARB 3 STAR / European Union.

Model Specific Specifications 

• Installation: Single
• Color: Slate Gray
• Shaft Length – in. (mm): 20 (508)
• Steering: iSteer DPS
• Model No.: C150HGLF
• Weight – lb (kg): 530 (240)
• Tilt Range: 81°
• Steering Angle: +/- 32°

Engine Evinrude E TEC G2 Engines 150 H.O. C150HGLF

Engine Type

H.O. V6 66° E-TEC G2 D.I.

Bore x Stroke

3.39 x 3.10 in. (86 x 78.7 mm)

Displacement

167 cu.in. (2.7L)

Starting

Electric

Dimensions

Shaft Length

20 in. (508 mm)

Weight

530 lb. (240 kg)

General

Trim Method

Power Trim & Tilt

Propshaft Horsepower

150 hp

Full Throttle Operating Range

5000-6000 RPM

Gear Ratio / Shift

2.17:1

Fuel Induction

E-TEC Direct Injection with stratified low RPM combustion mode

Alternator

133 Amps Total / 50 net Dedicated / 14 amps @ idle

Steering

iSteer DPS

Warranty

5-Year Engine / 5-Year Corrosion Engines 150 H.O. C150HGLF